Going to and playing in concerts is a blast. Large and small named bands draw different crowds to different venues. The type of venue will determine the set up that is needed for each concert. Having the right system can make a huge difference in how the bands sound to the crowd. There are two basic systems that are set up. Frontline and backline equipment setups vary based on the bands and the venues.
Frontline systems are made up of the monitors for the band to hear their sounds and the PA system. The reason these are called frontline systems is they are typically placed in front of the band. The rest, including amps, instruments, and other systems are set up behind the musicians. This is why these systems are usually called backline systems. Most bands have some of the systems needed, but they cannot be expected to have a different set for every concert. Larger or outdoor venues require sets that can broadcast widely. Smaller venues could use instrument amps to get the sound out. Check with the venue on what they have available before showing up for the booking.
This setup is very important and matters a great deal for the sound quality. There have been instances where up and coming bands with very little in the way of amps showed up to a venue thinking they would have the rest only to find out the venue expected the band to have everything needed. Without the amps, power, and someone to help with the sound check, the concert could be a bust.
Many bands have their systems with them. This isn't an indicator that they will always have what is needed. Part of the booking process is checking on the venue size and location, what power is available, and what systems are already in place. Concert-goers do not want to have to strain to hear or have a tinny sound being broadcast because the wrong set up was in place.
Permanent systems are common for larger venues. If they have concerts all the time, they've probably invested in a pretty nice system. Some will even have used drum sets and other instruments in case a band is in a bad spot. The parts that are not available at the venue can usually be rented prior to the concert date.
Smaller bands that are just getting started often need to rent what they need. This can save on the expense of buying the expensive systems up front and paying to transport them along with the band. Well established bands often have two or three buses, one of which contains all the systems they need. For those on a budget, having the venue rent specific speakers and systems is typical in a contract. The venue manager may already know what size is needed.
Sound checks are performed prior to the concert. With several bands playing in a single night, they will do setups and sound checks in reverse order. Once the last band is done getting set and checked, the next to last will set up. Once they're done, they will keep going until the first band to play is done. This allows each set to be pushed back so the first band has theirs ready to go at the beginning of the concert. When each band is done playing, they'll remove their equipment and the next band will push theirs forward on the stage so they can be ready to go quickly.
Having the right equipment for each venue is impossible, even for the biggest bands. Renting what you need based on the size and setup of the venue is often the best choice for traveling bands. Some venues will already be set up with most of what is needed, but this should always be worked out when the group is booked for a concert.
Frontline systems are made up of the monitors for the band to hear their sounds and the PA system. The reason these are called frontline systems is they are typically placed in front of the band. The rest, including amps, instruments, and other systems are set up behind the musicians. This is why these systems are usually called backline systems. Most bands have some of the systems needed, but they cannot be expected to have a different set for every concert. Larger or outdoor venues require sets that can broadcast widely. Smaller venues could use instrument amps to get the sound out. Check with the venue on what they have available before showing up for the booking.
This setup is very important and matters a great deal for the sound quality. There have been instances where up and coming bands with very little in the way of amps showed up to a venue thinking they would have the rest only to find out the venue expected the band to have everything needed. Without the amps, power, and someone to help with the sound check, the concert could be a bust.
Many bands have their systems with them. This isn't an indicator that they will always have what is needed. Part of the booking process is checking on the venue size and location, what power is available, and what systems are already in place. Concert-goers do not want to have to strain to hear or have a tinny sound being broadcast because the wrong set up was in place.
Permanent systems are common for larger venues. If they have concerts all the time, they've probably invested in a pretty nice system. Some will even have used drum sets and other instruments in case a band is in a bad spot. The parts that are not available at the venue can usually be rented prior to the concert date.
Smaller bands that are just getting started often need to rent what they need. This can save on the expense of buying the expensive systems up front and paying to transport them along with the band. Well established bands often have two or three buses, one of which contains all the systems they need. For those on a budget, having the venue rent specific speakers and systems is typical in a contract. The venue manager may already know what size is needed.
Sound checks are performed prior to the concert. With several bands playing in a single night, they will do setups and sound checks in reverse order. Once the last band is done getting set and checked, the next to last will set up. Once they're done, they will keep going until the first band to play is done. This allows each set to be pushed back so the first band has theirs ready to go at the beginning of the concert. When each band is done playing, they'll remove their equipment and the next band will push theirs forward on the stage so they can be ready to go quickly.
Having the right equipment for each venue is impossible, even for the biggest bands. Renting what you need based on the size and setup of the venue is often the best choice for traveling bands. Some venues will already be set up with most of what is needed, but this should always be worked out when the group is booked for a concert.
About the Author:
Get a summary of the factors to consider when picking a backline equipment supplier and more information about a reputable supplier at http://www.nvrentals.net now.
0 comments:
Post a Comment